Table of Contents
Advertisement
Removing waste oil container
Caution:
When replacing the waste oil container, observe the safety directives section
Replacing the waste oil container — overview on page
To remove the waste oil container
[171]
Proceed as follows:
1.
Open the center door at the back of the printing system.
2.
Prepare new empty waste oil containers and open interlock flaps.
[437]
3.
[438]
4.
5.
Close the full waste oil container with the interlock flap of the new waste oil
container.
6.
Installing waste oil container on page
Removing waste oil container
324.
Open interlock flap and pull out
the hose from the waste oil con-
tainer. Wipe away any residual
oil from the tube end on the
container opening.
Carefully remove the full waste
oil container from the mount-
ing.
326.
325
Advertisement
Table of Contents
