Buttons and displays in the center area
Buttons and displays in the center area
Introduction
You can use the buttons in the center area of the toolbar to switch to frequently used
menus.
Buttons
[30]
Button
'Job control'
'Channel control'
[72]
[73]
[74]
[75]
[76]
70
Chapter 4 Operator panel description
Function
Switches to the buttons under 'Job control' in the 'Emula-
tions' menu.
Switches to the 'Channels' menu.
The following buttons are available here:
[70]
Activates the channel. The connecting icon is closed.
[71]
deactivates the channel. The connecting icon is opened.
During the time required to activate or deactivate a chan-
nel, the connecting icon is displayed in yellow.
If a message was also transmitted by the data stream, this
icon is displayed.
Click here to switch directly to the 'Job preparation' tab
in the 'Job setup' menu. The complete message will be
displayed there.
If there is a new message from another user, this icon is
displayed.
Click here to switch directly to the 'Notes' menu. This is
where all notes or messages are displayed.
Flashes when there is an error message.
Flashes when there is a warning.
Flashes when there is information.
When there is no error message, warning or information,
this button is hidden.
Clicking this button switches to the 'Errors and warnings'
menu.