Table of Contents
Advertisement
Final tasks for installing the developer station
Final tasks for installing the developer station
Caution:
Heavy weight:
Note the heavy weight of the developer station (approx. 70 kg/145.35 lb) and
the correct functioning of the locks on the replacement cart.
Hot surfaces
After a longer period of printing, the motor of the developer station may be
hot. Do not touch the motor.
Attention:
Danger of damage
Bear in mind the width and height of the replacement cart when moving it.
To complete the installation of the developer station
[124]
Proceed as follows:
[298]
1.
2.
Insert the toner suction hose to the stop point in the developer station.
234
Chapter 6 Operating the printing system
Remove the toner suction hose
and vacuum hose from the rub-
ber mounting.
Advertisement
Table of Contents
