Table of Contents
Advertisement
Preparing to insert the paper web on twin or triplex printing
systems
Note:
To insert paper, all printing systems must be powered on, i.e. the main switches are
in position I and the POWER ON keys have been activated.
In order to prepare to insert the paper web for twin/triplex printing systems
[73]
Proceed as follows:
1.
Set on the operator panel whether you are printing one-sided or two-sided
with a twin printing system or with a triplex printing system.
Select 'Configuration' -> 'Printing system' -> 'Operating mode' in the menu:
2.
Open cover hoods.
3.
Open the left and right doors at the front of the printing system.
4.
Cut through the paper web before the external paper feed of the first printing
system.
5.
Remove paper web from the other printing systems
8.
Insert paper web in the first printing system (see
per web - overview on page
Preparing to insert the paper web on twin or triplex printing systems
'Twin simplex', or
'Twin duplex', or
'Triplex'
127).
Preparing to insert the pa-
149
Advertisement
Table of Contents
