Table of Contents
Advertisement
Buttons and displays in the center area
Status displays with green background
[31]
Display
'Ready'
'Printing'
'Preparation'
'Pre-/post-processing
not ready'
Status displays with red background
[32]
Display
'Operator intervention
necessary'
Status displays with gray background
[33]
Display
'Initialization'
'Insert paper'
'Powering off'
'Setup'
'Special functions'
'Stop'
'Preparation'
'Pre-/post-processing
not ready'
72
Chapter 4 Operator panel description
Meaning
The printing system is ready to print, there are no error
messages.
Normal print operation.
The printing system switches from the 'Stop' status to the
'Ready' status.
The printing system is ready to print, but the
pre/post-processing unit is not.
Meaning
An error message is displayed. The error must be correct-
ed, otherwise printing cannot continue.
All current messages are also displayed in the 'Errors and
warnings' menu.
Meaning
The printing system is being initialized and is not yet
ready for printing.
The paper web can be inserted.
The printing system is being prepared to power off. A
shut-down setup is being written, all components are be-
ing exited.
A setup is being loaded or saved.
Consumables are being replaced or the printing system is
being cleaned.
The printing system has stopped.
The printing system is switched on, device control is be-
ing prepared.
Printing is interrupted because the paper
pre/post-processing unit has stopped. The printing proc-
ess will continue when the paper pre/post-processing unit
is ready.
Advertisement
Table of Contents
