Table of Contents
Advertisement
Replacing the developer — overview
Replacing the developer
Replacing the developer — overview
Caution:
Do not allow developer to get into eyes. In the event of contact with eyes,
rinse eyes out with plenty of cold water and seek medical help.
Avoid contact with the skin; wear gloves. In the event of contact with the
skin, wash with plenty of cold water.
Do not inhale developer. Avoid accumulation of dust. If, after inhaling
developer, you experience symptoms such as nausea, headaches or
dizziness, immediately go out into the fresh air.
Do not spill developer. You can slip on spilled developer.
Clean up developer spill immediately. Always use an industrial vacuum
cleaner with a grounded suction tube, rubber nozzle and filter set for fine
dust. For larger quantities, the industrial vacuum cleaner must be
explosion-proof.
Keep developer out of the reach of children and store it away from
containers used for food and drink.
Attention:
- Only use approved developer (see
Only use original, sealed developer bottles secured by an intact band.
Do not re-use developer.
Always store developer in a cool (< 35
Never expose developer to direct heat (sunlight, heaters, etc.)
Note:
Only use an original, sealed developer bottle to refill the developer.
Keep used developer ready for collection by Service or the contracted shipping
company.
The printing system will continue to print even when the end of the developer's
service life has been reached.
This means that the developer counter in the 'Consumable counter' menu can also
register negative.
306
Chapter 8 Replacing consumables
Developer on page
o
C), dry and well ventilated room.
297).
Advertisement
Table of Contents
