Table of Contents
Advertisement
Installing waste oil container
Installing waste oil container
Caution:
When replacing the waste oil container, observe the safety directives section
Replacing the waste oil container — overview on page
To install the waste oil container
[172]
Proceed as follows:
[439]
1.
2.
Wipe away any spilled oil with a paper towel.
[440]
Important
The hose can bend. The waste oil cannot be filled in this case.
Ensure that the hose is not bent when you connect the hose to the waste oil
container.
[441]
3.
4.
Close the center door at the back of the printing system.
326
Chapter 8 Replacing consumables
324.
Place the new waste oil contain-
er so that the handle faces to the
left.
Connect the hose to the waste
oil container and close with the
interlock flap. Make sure that
there is no bend in the hose.
Advertisement
Table of Contents
