Table of Contents
Advertisement
Complete corotron replacement
Complete corotron replacement
To complete corotron replacement
[203]
Proceed as follows:
1.
Corotron locking being checked.
If this step cannot be completed, re-open and close the locking mechanism
of the corotron mountings.
2.
Close both front doors and the cover of the printing system.
3.
Click the 'OK' button to lower corotrons.
4.
Enter on the operator panel whether a new corotron was fitted:
5.
Click the 'OK' button on the operator panel to complete corotron replace-
ment.
All aggregates of the printing system are inspected (duration around
two-three minutes), before the printing system is switched to the 'Ready'
status.
370
Chapter 9 Replacing expendables
If new corotrons were fitted, click the 'Yes' button.
The message is automatically deleted from the operator panel and the
consumable counter is reset.
If no new corotrons were fitted, click the 'No' button.
The consumable counter is not reset.
Advertisement
Table of Contents
