Remove transfer roller
Attention:
When replacing or cleaning the transfer roller, there must be no paper in the
printing system.
Removing the transfer roller
[224]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button.
2.
On the operator panel, select the 'VarioStream' -> 'Changing consumables'
-> 'Replace/Clean transfer roller' menu.
3.
Click the 'OK' button to start the procedure.
Information on the icons displayed on the operator panel under
'Work-steps': See
4.
Cut inserted paper in the paper input at a right angle to the transport device
and remove from the printing system by continuously pressing the 'Eject'
button.
5.
Open the cover hood.
6.
Open the left and right doors at the front of the printing system.
[598]
7.
Explanation of icons on page
Remove transfer roller
118.
Push the lever to the right and
slowly swivel off the paper
transport.
419