Table of Contents
Advertisement
Clean soft fuser roller
Proceed as follows:
[365]
9.
[366]
10.
[367]
11.
12.
Close the front and side door of the fuser station.
13.
Close the cover hood.
14.
To switch the printing system to the 'Ready' status, click the 'Ready' button
again.
272
Chapter 7 Cleaning the printing system
Press the cloth lightly on to the
fuser roller and remove all toner
residue with circular move-
ments.
Swivel back the dirt bin and
lock by pressing the knob.
Swivel on the cleaning station
again and tighten the knob.
Advertisement
Table of Contents
