Table of Contents
Advertisement
Cleaning the printing system generally
Cleaning the printing system generally
Caution:
There can be a high build-up of static charge when vacuuming the toner
spill.
Always use an industrial vacuum cleaner with a grounded suction tube,
rubber nozzle and filter set for fine dust. For larger toner quantities, the
industrial vacuum cleaner must be explosion-proof.
Caution:
Before cleaning, observe the safety directives in the section
printing system — overview on page
To clean the whole printing system
[152]
Proceed as follows:
1.
Vacuum clean the floor around the printing system.
[406]
Caution
Fluid can get inside the printing system. This could cause irreparable damage
to the electrical and mechanical components.
Do not place cleaning fluids on top of or in the immediate vicinity of the
printing system and ensure that no fluids enter the printing system.
2.
Cleaning the surface of the casing:
294
Chapter 7 Cleaning the printing system
Add some mild household detergent to water and dip a soft cloth into the
solution.
Wring the cloth out well. Use it to wipe off the surface of the casing.
250.
Cleaning the
Advertisement
Table of Contents
