Table of Contents
Advertisement
To remove the developer station
[120]
Proceed as follows:
[271]
1.
[272]
2.
3.
Check whether the replacement cart is engaged on the printing system:
Grasp the replacement cart by the handle and pull backwards. The replace-
ment cart must not come away from the printing system now.
[273]
Caution
Possibility of damage to the replacement cart.
Make absolutely sure that the replacement cart has engaged in the printing
system. Otherwise, the replacement cart could be damaged at the horizontal
guide rails when the developer station is pulled from the printing system in
the next step.
Removing the developer station
Move maintenance cart towards
printer and set height of sup-
ports exactly:
Turn setscrews so that both pins
are directly positioned opposite
the corresponding holes on the
printing system.
Push the replacement cart for-
wards into the holes to the stop
point.
223
Advertisement
Table of Contents
