Remove dirt bin
Remove dirt bin
Caution:
Observe the safety directives in the section
on page
423.
Removing the dirt bin
[226]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button:
2.
Open side door of fuser station.
[608]
Caution
During operation, the components in the fuser station reach a surface tem-
perature of approximately 230
burns.
Do not touch any parts behind the safety covers identified with this icon:
[609]
[610]
3.
424
Chapter 9 Replacing expendables
Replacing the dirt bin - overview
o
C. Touching the components can cause
To open, turn the knob of the
oiling unit to the left and swivel
the oiling unit open.