Proceed as follows:
[523]
10.
11.
Close the front and side door of the fuser station.
Completing the heating element replacement
[208]
Proceed as follows:
1.
Indicate on the operator panel whether a new heating element has been fitted:
In both cases, the message on the operator panel is automatically deleted, and
the replacement of the pressure roller is recorded in the 'Consumables histo-
ry' menu.
2.
Click the 'OK' button on the operator panel to complete the procedure:
All units of the printing system are inspected (duration around 2-3 minutes),
before the printing system is switched to the 'Ready' status.
'Yes'
The consumable counter is reset.
'No', if the heating element was not replaced, but only removed and then
re-inserted for control purposes, for example.
The consumable counter is not reset.
Installing the heating element
Swivel on oiling unit and turn
the oiling unit knob to the right
to lock it.
379