Filling toner box
To fill the toner box
[174]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button:
2.
Select the 'VarioStream' 'Changing consumables' 'Fill toner box' menu on the
operator panel.
3.
Click the 'OK' button to start filling the toner box:
The toner is fed into the toner box.
Information on the icons displayed on the operator panel under 'Work-steps':
See
4.
Click the 'OK' button on the operator panel to complete the 'Fill toner box'
procedure.
All aggregates of the printing system are inspected (duration around two to
three minutes) before the printing system is switched to the 'Ready' status.
Explanation of icons on page
118.
Filling toner box
331