Table of Contents
Advertisement
'Setup' menus
'Setup' menus
In setups, special settings for frequently recurring print requests can be grouped
together and saved. By loading a setup, the printing system can be configured
quickly with the right parameters for a print request.
If the printing system is powered up and it is not possible to load a setup, then the
settings from before the printing system was powered down continue to apply.
'Overview of loaded setups'
Displays all currently loaded setups. If the current settings have been changed since
the time when the setup was loaded, this is also displayed.
On the 'Color setup', the Color Setup Verification ID ('CSVID') is displayed in
addition to the name. Whether or not the 'CSVID' is displayed decimally or
hexadecimally depends on the setting in the 'Emulations' - 'General' menu under
'Display of CSVID'.
If the relevant channel is available, information on the channel setup is also
displayed.
'Job setup' menu
Display and editing of generally valid print job parameters.
'Color setup' menu
Display of parameters for the colors currently used in the printing system (including
black).
In color setups, parameters for the colors currently used in the printing system can
also be loaded and saved. The color setups are independent of the job setups.
Menu 'Setup channel A' / 'Setup channel B' / 'Setup channel C'
Display of setups for 'Channel A', 'Channel B' or 'Channel C'.
Channel-specific settings for frequently recurring print jobs can be combined into a
channel setup and saved under a name. By loading a setup of this type, the printing
system is automatically set up with the corresponding parameters for the print job.
'Setup' menus
85
Advertisement
Table of Contents
