Table of Contents
Advertisement
To prepare for developer filling
[163]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button:
2.
Select the 'VarioStream' 'Changing consumables' 'Fill developer' menu on
the operator panel.
3.
Click the 'OK' button to start the procedure.
Information on the icons displayed on the operator panel under
'Work-steps': See
4.
Open the left and center door at the back of the printing system.
[420]
5.
[421]
6.
Explanation of icons on page
Fill developer
118.
Set the rotary switch to PRINT.
Turn the knob to the left and
swivel off the fan from the de-
veloper station.
313
Advertisement
Table of Contents
