Install pressure roller
Install pressure roller
Caution:
Observe the safety directives in the section
overview on page
To install the pressure roller
[195]
Proceed as follows:
1.
Remove the new pressure roller from the packaging.
[480]
Caution
The components in the fuser station could still be hot.
Do not touch any parts behind the safety covers identified with this icon:
[481]
2.
Put on heat protection gloves.
[482]
3.
356
Chapter 9 Replacing expendables
351.\
Replacing the pressure roller -
Carefully insert the pressure
roller into the fuser station from
below and place in the insert
shell and secure.