Table of Contents
Advertisement
Proceed as follows:
[489]
11.
12.
Close the side door of the fuser station.
13.
Enter on the operator panel whether a new pressure roller has been fitted:
'Yes'
The consumable counter is reset.
'No', if the pressure roller is not replaced, but instead just cleaned, for ex-
ample.
The consumable counter is not reset.
In both cases, the message on the operator panel is automatically deleted,
and the replacement of the pressure roller is recorded in the 'Consumables
history' menu.
14.
Click the 'OK' button on the operator panel to complete the procedure:
All aggregates of the printing system are inspected (duration around two to
three minutes) before the printing system is switched to the 'Ready' status.
Install pressure roller
Swivel on oiling unit and turn
the oiling unit turning knob to
the right to lock it.
359
Advertisement
Table of Contents
