2-1-3
Change the Behavior of Operation
The following changes are possible depending on the system configuration and usage.
Change the type of trigger
Change the trigger delay of trigger
Change the trigger porality of trigger
Change the assignments for the Output Signal (Output
1 to 3) ON Condition
Change the ON/OFF timing of the Output Signal (Out-
put 1 to 3)
Change the Output polarity of Output Signal (Output 1
to 3)
F440-F/F430-F/F420-F Series Smart Camera User's Manual for Communication Settings (Z444)
2 Controlling Operation and Data Output with Parallel
Type
Modification
You can change the method used to trigger a Read
(Triggered, or Continuous).
You can change the trigger delay of trigger.
You can change the trigger porality of trigger.
You can change the ON Condition for Output 1 to 3.
You can change the OFF timing of Output 1 to 3 after it
turns ON.
You can change the Output polarity of Output 1 to 3.
2
2-5