Tls Parameters - AudioCodes Mediant 800B User Manual

User's Manual
Parameter
disable-tx
[RTPEncryptionDisableTx]
Disable Encryption On
Transmitted RTCP Packets
configure voip > media
security > RTCP-encryption-
disable-tx
[RTCPEncryptionDisableTx]
configure voip > sip-definition
settings > srtp-state-behavior-
mode
[ResetSRTPStateUponRekey]

67.5.4 TLS Parameters

The Transport Layer Security (TLS) parameters are described in the table below.
Parameter
TLS Contexts Table
TLS Contexts
configure system > tls #
[TLSContexts]
TLS Client Re-Handshake
Interval
configure network/security-
settings/tls-re-hndshk-int
[TLSReHandshakeInterval]
Version 7.2
Enables encryption on transmitted RTCP packets in a secured RTP
session.

[0] Enable (default)

[1] Disable
Global parameter that enables synchronization of the SRTP state
between the device and a server when a new SRTP key is generated
upon a SIP session expire. You can also configure this functionality
per specific calls, using IP Profiles
(IpProfile_ResetSRTPStateUponRekey). For a detailed description of
the parameter and for configuring this functionality in the IP Profiles
table, see 'Configuring IP Profiles' on page 405.
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with
the IP Profile.
Table 67-27: TLS Parameters
Defines SSL/TLS certificates.
The format of the ini file table parameter is as follows:
[ TLSContexts ]
FORMAT TLSContexts_Index = TLSContexts_Name,
TLSContexts_TLSVersion, TLSContexts_ServerCipherString,
TLSContexts_ClientCipherString, TLSContexts_RequireStrictCert,
TLSContexts_OcspEnable, TLSContexts_OcspServerPrimary,
TLSContexts_OcspServerSecondary,
TLSContexts_OcspServerPort,
TLSContexts_OcspDefaultResponse;
[ \TLSContexts ]
For a detailed description of the table, see 'Configuring TLS
Certificate Contexts' on page 103.
Defines the time interval (in minutes) between TLS Re-
Handshakes initiated by the device.
The interval range is 0 to 1,500 minutes. The default is 0 (i.e., no
TLS Re-Handshake).
1015
67. Configuration Parameters Reference
Description
Description
Mediant 800B Gateway & E-SBC