Main Hardware Parts - Oce VarioPrint i Series Operation Manual

Hide thumbs Also See for VarioPrint i Series:
Table of Contents

Advertisement

Main hardware parts

Main hardware parts
The VarioPrint i-series is a modular printer. The modules in the front position are mainly used for
the job production. The modules in the rear position give access to the consumables, service
units, and control units.
The VarioPrint i-series can have up to three paper input modules and one or two high capacity
stackers. More equipment can be connected to the printer for finishing the output.
There are two hardware models of the VarioPrint i-series. The first model has a registration
output module with an output tray and an ink cabinet with drawers. The other model has a
registration output module without an output tray and a cabinet without drawers. Most options
and features are applicable to both models. When needed this operation guide describes
instructions for both models.
Front view
Below is an overview of the main parts visible from the control panel of the printer.
15
14
1
2
[1] Front view of the printer
Description main hardware parts
1
The operator desk and the control panel are the local communication point for the opera-
tor.
2
PRISMAsync Print Server steers the performance, workflow, and print quality of the printer.
3
Up to three paper modules hold and feed the media. The paper modules keep the loaded
media in optimal condition.
4
The paper path module positions the media correctly on the paper path and turns the
sheets before the second sides are printed.
5
The registration input module positions the media correctly on the paper path and purges
sheets with imperfections.
6
The sentry detects sheets with imperfections, such as waves, bursts, and folded corners.
7
The sentry tray collects sheets with imperfections detected by the sentry. These sheets do
not enter the print module.
20
Chapter 2 - Explore the printer
13
8
11
12
16
17
10
9
7
5
6
4
3
4

Advertisement

Table of Contents
loading

Table of Contents