Table of Contents
Advertisement
Chapter 6: Troubleshooting
6.3 ERROR MESSAGES
This chapter explains the messages displayed on the operation panel both when the printer works normally
and when an error occurs, and possible solutions.
6.3.1 Status messages
The following are the status messages while the printer works normally.
(1) Displays the operational status (1)
The following operational status is displayed on the first line of the operation panel.
No.
Display
1
Ready to print
2
Media End
3
Receiving
4
Converting
5
Printing
6
Warning Waste Ink
Tank
7
Warning Ink Tube Life
(2) Displays of the operational status (2)
The following operational status is displayed between the first and the third line of the operation panel.
No.
Display
1
Ink Refill **min
2
During cleaning **min
3
Media Initial ********
4
During discharge
Wait for a while
5
During washing
Wait for a while
AP-75036 - Revision 1.3 – 20/03/06
Solutions
Waiting for the next operation. (Media has been
loaded.)
The printer is waiting for the next operation.
(No media has been loaded into the printer.)
The printer is receiving data.
The printer is converting data.
The printer is printing.
Replace the waste liquid tank.
Contact the Océ's technical support center.
Solutions
The printer performs ink charging. Wait for a while.
The printer performs head cleaning. Wait for a
while.
The printer performs initial setting of media.
Wait for a while. Indicates the media type setting
made.
The printer performs head cleaning and ink
discharging. Wait for a while.
The printer performs a head cleaning.
Wait for a while.
144
References
-
Refer to 'Media
handling'
-
-
-
Refer to 'Replacing
the waste liquid tank'
-
References
Refer to 'Installing
ink cassettes'
Refer to 'Head
cleaning'
Refer to 'Setting
media type'
Refer to 'Changing
Ink Types'
Refer to 'Changing
Ink Types'
User's Guide CS9000 series
Advertisement
Chapters
Table of Contents
