Change The Heater Temperature; Change The Fixer Temperature; Change The Post Fixer Temperature; Change The Dryer Temperature - Oce CS9090 User Manual

5.5.3.1

Change the heater temperature

To change the temperature of the heater, press the [F1] key on the operation panel. The display will mention
the following:
Press the [F2] key to decrease the temperature.
Press the [F4] key to increase the temperature.
Press the [ENTER] key to confirm the requested temperature change.
Press the [CANCEL] key to leave the menu without changing the heater settings.
5.5.3.2

Change the fixer temperature

To change the temperature of the fixer, press the [F2] key on the operation panel. The display will mention
the following:
Press the [F2] key to decrease the temperature.
Press the [F4] key to increase the temperature.
Press the [ENTER] key to confirm the requested temperature change.
Press the [CANCEL] key to leave the menu without changing the heater settings.
5.5.3.3

Change the post fixer temperature

To change the temperature of the post fixer, press the [F3] key on the operation panel. The display will
mention the following:
Press the [F2] key to decrease the temperature.
Press the [F4] key to increase the temperature.
Press the [ENTER] key to confirm the requested temperature change.
Press the [CANCEL] key to leave the menu without changing the heater settings.
5.5.3.4

Change the dryer temperature

To change the temperature of the dryers, press the [F4] key on the operation panel. The display will mention
the following:
Press the [F2] key to decrease the temperature.
Press the [F4] key to increase the temperature.
Press the [ENTER] key to confirm the requested temperature change.
Press the [CANCEL] key to leave the menu without changing the rear heater settings.
AP-75036 - Revision 1.3 – 20/03/06 131
Chapter 5: Handling the printer
User's Guide CS9000 series