How To Change Passwords - Tekelec T1000 Hardware Manual

Procedure 6-8.
1.
Ensure that all AC and DC connections have been secured and checked.
2.
Verify the ground at the AC outlet.
3.
Plug the rectifier into the AC outlet.
4.
Check that the rectifier is operating with no alarms present. The rectifier
controller should display "System OK." If there are alarms present, refer to the
documentation that came with the rectifier for troubleshooting assistance
before proceeding.
5.
Set the rectifier output breakers to "ON" to send power to the T1000 AS unit.
6.
This procedure is complete.

How to Change Passwords

For security purposes, Tekelec recommends that all default passwords be changed
to your own passwords. The new passwords should be kept in a secure location.
• To change the passwords for the T1000 AS platforms, refer to the application
manual for the application loaded on each server.
• To change the passwords for the Ethernet switches, refer to the documentation
that accompanies that product.
NOTE: There should always be a person on-site who knows the new
passwords. If there is a need to contact Tekelec Customer Care Center, please
provide the passwords on request.
910-0095-001 Revision J November 2007
Power Up T1000 AS Unit in an AC Environment
How to Change Passwords
6-15