Figure 6-5. Frame And Logic Ground Cable Attachment Locations - Tekelec T1000 Hardware Manual

How to Connect Frame Ground and Logic Ground

Figure 6-5. Frame and Logic Ground Cable Attachment Locations

NOTE 1: DO NOT run Logic Ground or Power Cables on the cable horns
in the top middle of a frame.
NOTE 2: The number of inter-frame Logic Ground connections may vary
from the example shown in Figure 6-5. (One logic ground connection per
T1000 AS.)
4.
This procedure is complete.
Next, go to Procedure 6-5, "Connect Logic Ground: T1000 AS Logic Ground Port
to Logic Ground Terminal Strip," on page 6-11.
6-10
Frame Rear
Ground strap
Frame Ground
CHASSIS
LOGIC GND
GND PWR B
CLK
USB
A
SERIAL
VGA
B
Cable must fill and
be visible
in lug window
Logic Ground
To PANI Isolated
Frame Ground
L o g i c G r o u n d
T e r m i n a l S t r i p
1
PWR A
03_ts_frame_logicgnd
910-0095-001 Revision J November 2007
#6AWG