How to Replace T1000 AS FRUs
Figure 7-19. PCI Card Part Label
– A label (see Figure 7-20) to attach to the PCI card label on the left side
Figure 7-20. PCI Slots Label
WARNING: This procedure CANNOT be performed while the T1000 AS
chassis is powered on. Never power OFF a T1000 AS chassis until the
application software and platform operating system (OS) are shut down. If
possible, use the procedures in the application manual for a "soft
shutdown." If the application interface is not operating or is not accessible,
a hard shutdown (turning OFF the breakers) is sometimes required. Contact
Tekelec Customer Care Center before doing a hard shutdown.
2.
Turn OFF the circuit breakers that supply power to the T1000 AS chassis
containing the PCI card to be removed.
7-38
of the T1000 AS chassis (see Figure B-7 on page B-10)
910-0095-001 Revision J November 2007
03_ts_pci_config_label