Tekelec T1000 Hardware Manual page 11

Procedure 4-1. How to Unpack Frame and Conduct Inventory...............4-2
Procedure 4-2. Mark Floor Layout ................................................................4-4
Procedure 4-3. Create Cable and Anchor Holes for Raised Floors ..........4-5
Procedure 4-4. Anchor a HD Frame into a Slab Floor................................4-7
Procedure 4-5. Anchor the Frame to the Slab Beneath the Raised Floor4-11
Procedure 4-6. Anchor Frame to Raised Floor with Support Channel..4-14
Procedure 4-7. Anchor Frame with Support Channel/Spring Nut .......4-16
Procedure 4-8. Attach Overhead Rack Support ........................................4-18
Procedure 5-1. Unpack a T1000 AS Chassis.................................................5-2
Procedure 5-2. How to Unpack the Rectifier ...............................................5-4
Procedure 5-3. Installing a T1000 AS Chassis..............................................5-5
Procedure 6-1. Prepare the Ground Cables .................................................6-4
Procedure 6-2. Connect Ground Cable: Frame to Ground Window........6-4
Procedure 6-3. Connect T1000 AS Chassis Ground: T1000 AS
Chassis to Frame ........................................................................................6-7
Procedure 6-4. Connect Logic Ground from Logic Ground Terminal
Strip to Ground Window ..........................................................................6-8
Procedure 6-5. Connect Logic Ground: T1000 AS Logic Ground Port
to Logic Ground Terminal Strip ............................................................6-11
Procedure 6-6. Connect Chassis Ground: T1000 AS Chassis to
Ground on Rectifier .................................................................................6-11
Procedure 6-7. Verify AC ground ...............................................................6-12
Procedure 6-8. Power Up T1000 AS Unit in an AC Environment..........6-15
Procedure 7-1. Replace an Ethernet Switch, Router, Hub, or
Console Server............................................................................................7-4
Procedure 7-2. Replace a Rectifier Module ..................................................7-6
Procedure 7-3. Replace a Rectifier.................................................................7-6
Procedure 7-4. Slide T1000 AS Chassis Out from Frame ...........................7-8
Procedure 7-5. Slide T1000 AS Chassis Back into Frame ...........................7-9
Procedure 7-6. Remove a T1000 AS Chassis from Frame ........................7-10
Procedure 7-7. Return a T1000 AS Chassis to the Frame .........................7-15
Procedure 7-8. Replace Air Filter ................................................................7-18
Procedure 7-9. Replace a Fan Assembly.....................................................7-20
910-0095-001 Revision J, November 2007
— Draft —
List of Procedures
ix