Figure 7-12. Front Cover With Drive Mounting Brackets - Tekelec T1000 Hardware Manual

How to Replace T1000 AS FRUs

Figure 7-12. Front Cover With Drive Mounting Brackets

Stand-Offs
(On Cover)
# 6-32 Panhead
Screws (Attach
Bracket to Cover)
10.
Slide the drive mounting bracket with attached hard disk drive down until
the # 6-32 screws in the stand-offs can slip though the larger holes in the
keyhole slots.
11.
Remove the hard disk drive with attached mounting bracket and store in an
approved ESD package or place on a grounded bench.
NOTE: DO NOT remove the drive from the drive mounting bracket. The
mounting bracket is part of the drive assembly. A replacement drive is
shipped with the bracket. A replacement T1000 AS chassis is not shipped
with drive brackets installed.
7-28
"A" Drive
Position Label
Expanded
View
Removable Media
Disk Drives
Drive Mounting
Bracket
910-0095-001 Revision J November 2007
"C" Drive
Position Label
Fixed Media
Disk Drives