Network Configuration; Firewall And Router Filtering Considerations - Tekelec T1000 Hardware Manual

Network Configuration

Network Configuration
DSM and Sync Network addresses are configured to default values at EPAP or
ELAP initialization and should not need to be changed. If they need to be
changed for any reason, refer to sections "Network Connection" and
"Configuration Menu" in the ELAP Administration Manual or EPAP Administration
Manual included in your current Documentation Suite.
The provisioning network addresses are configured using the ELAP or EPAP user
interface configuration menu; refer to "Configuration Menu" in the ELAP
Administration Manual or EPAP Administration Manual.

Firewall and Router Filtering Considerations

If a firewall is installed in the provisioning network between the MPS systems or
between the MPS system(s) and the provisioning system, it must be configured to
allow selected traffic to pass.
Firewall protocol filtering for the various interfaces is defined in Table C-5 from
the perspective of each MPS
.
C-8
— Draft —Preliminary
910-0095-001 Revision J, November 2007