WARNING: Observe proper ESD procedures when handling the T1000
AS chassis. Always wear an ESD wrist strap connected to a grounded bench
or frame.
3.
Unpack the T1000 AS chassis from the shipping container and place the unit
on a secure workbench that is grounded for ESD protection. Discard the
container and packing material.
4.
Inspect the T1000 AS chassis for indication of damage. If damage is noted, go
to step 7.
5.
Remove the slide assemblies from the shipping container. The slide assemblies
(see Figure 5-1) consist of three sections that will be attached to the T1000 AS
chassis and frame.
Figure 5-1. Slide Assembly
Detent Latch
910-0095-001 Revision J November 2007
How to Unpack and Conduct Inventory
Middle Slide Member
Outer Slide Member
Inner Slide Member
Release Button
Located on other side
5-3