Rectifier
Rectifier
In Alternating Current (AC) environment, a rectifier is used to accept AC input
from the environment's power source and produce DC output that can be used by
the T1000 AS unit.
Rectifier Overview
Figure 3-10 shows an example rectifier.
Figure 3-10. Rectifier
In a T1000 AS hardware system in an AC environment, the rectifier system
contains two rectifier modules; Figure 3-10 shows two rectifier modules, one each
in Slots 1 and 2, and a blank module in Slot 3. Each rectifier module is
hot-swappable (can be replaced without turning off power to the rectifier
system).
For a more detailed drawing of the rectifier, see AC_PowerSystem.pdf. For more
information about its features, refer to the documentation delivered with the
product.
Rectifier Breaker Settings
To turn on power from the rectifier to the T1000 AS unit, open the door at the
right of the rectifier and turn all the breakers to ON.
3-14
2 amp
rectifier
module
Rectifier module
serial number
Slot 1
Slot 2
2 amp
rectifier
module
AC power plug
Slot 3
Door latch
2 breakers
910-0095-001 Revision J November 2007
Blank
rectifier
module
Rectifier system
serial number