How to Install an Individual T1000 AS Unit
Figure 5-11. Rear Cable Management Arm Installation
NOTE: The mounting position for the additional server may vary. The
position shown in Figure 5-11 is for example only.
15.
Route and connect the power and data cables through the cable management
arm to the T1000 AS chassis. Check the labels on the cables and attach them to
the appropriate connectors on the rear of the T1000 AS chassis (see
Figure 5-12). For information about cables used, see "How to Cable
Components Added to Existing Frames" on page 5-16.
5-14
Rear Cable
910-0095-001 Revision J November 2007