Figure B-11. Pci Slots Label On T1000 As Chassis; Procedure B-5. How To Locate Rma Numbers For Pci Cards - Tekelec T1000 Hardware Manual

How to Locate T1000 AS Part Numbers

Figure B-11. PCI Slots Label on T1000 AS Chassis

Procedure B-5. How to Locate RMA Numbers for PCI Cards

1.
Request that Tekelec Customer Care Center assist you in determining the
which slot (1 through 8) contains the PCI card that needs to be replaced.
2.
Determine whether the required PCI slot area of the PCI slots label on the rear
of the left side of the T1000 AS chassis can be viewed from the side of the
frame without sliding the chassis out from the frame. See Figure B-10 for the
placement of the label on the chassis and Figure B-11 for the location of each
PCI slot information on the label.
3.
If the necessary PCI slot area of the PCI slots label shown in Figure B-10 can be
viewed, report the requested information from the label, and skip to step 10.
Otherwise, perform the remaining steps.
WARNING:
frame when working on electronic components.
4.
From the front of the frame, remove the # 12-24 Phillips screw from each
chassis retention bracket (see Figure B-12). Do not remove the screws in the
frame adapter brackets.
B-14
Always wear an ESD wrist strap grounded to the bench or
03_ts_pci_config_label
910-0095-001 Revision J November 2007