Figure 7-8. T1000 As Front Top Cover - Tekelec T1000 Hardware Manual

Figure 7-8. T1000 AS Front Top Cover

Chassis Retention
Brackets (Remove these Screws)
4.
Grasp the handles on the front top cover of the chassis and lift up until the
constant torque hinges support the weight of the cover and the four attached
disk drives located under the cover.
5.
Disconnect the fan assembly cable of the fan to be removed from the connector
on the midplane board. Components used in the following steps are shown in
Figure 7-9.
910-0095-001 Revision J November 2007
Handles
Captive Cover Screws
How to Replace T1000 AS FRUs
(Do NOT Remove
These Screws)
7-21