How to Cable a T1000 AS and Rectifier Installed in
Customer-Provided Frame
WARNING: Verify that all breakers are set to the OFF (O) position.
In an Alternating Current (AC) environment, after the T1000 AS unit and the
rectifier have been installed, attach cables.
To determine the cables used and how to connect them, refer to the
interconnect
and a diagram of how to connect it.
NOTE: Some of the listed cables are used only as required. Actual cables used
may vary by application.
To view a drawing of a cable, click on the
the cables that appear in the system interconnect diagram with a link from each
part number to the drawing for that part number.
910-0095-001 Revision J November 2007
How to Cable Components Added to Existing Frames
diagram, which lists each cable, its quantity, length, how it is used,
AC Cable List
document, which lists all
AC system
5-17