Table of Contents
Advertisement
Introduction
Introduction
This manual is a generic manual that describes common components of Tekelec
1000 Applications Server (AS) hardware systems and describes how to install
them and replace them. A T1000 AS hardware system consists of one or more
Tekelec 1000 platforms (with applications loaded) and any additional hardware
(such as hubs, switches, or power distribution equipment) needed to support the
applications.
NOTE: This manual includes links to documents that are specific to a given
product, depending on which product CD this manual is viewed. Although the
manual is the same on CDs for various products, the linked documents are
different on different product CDs. For more information about linked
documents, see "Where to Find Other Information" on page 1-3.
T1000 AS hardware systems are delivered with applications already loaded.
• Most applications run on T1000 AS hardware systems installed in a Direct
Current (DC) environment.
• Some applications may run on T1000 AS hardware systems installed in a
Alternating Current (AC) environment, in which the T1000 AS hardware
system contains a rectifier to convert AC power to DC used by the T1000
AS platform.
For more information about T1000 AS hardware systems in AC and DC
environments, see Chapter 3, "T1000 AS Hardware System Overview."
Each time this manual is published, the revision level is changed. For example,
the first time this manual is published, it uses Revision A; the second time it is
published, it uses Revision B.
Where to Find Information in This Manual
Table 1-1 shows how this manual is organized.
Table 1-1.
Chapter Number and Title
Chapter 1, "About This Manual"
Chapter 2, "Safety and Pre-Installation
Requirements"
Chapter 3, "T1000 AS Hardware System
Overview"
Chapter 4, "How to Install a T1000 AS Frame" Describes how to install a heavy duty frame
1-2
Manual Organization
Description
Describes how to use the manual, where to
find other information, and how to contact
Technical Services.
Lists general safety instructions that readers
should be familiar with, and lists site
requirements that should be verified before
installing T1000 AS hardware systems.
Presents an overview of the various hardware
components that can be included in T1000 AS
hardware systems.
which is delivered from manufacturing with
T1000 AS units mounted in a heavy-duty
frame for use in a DC environment.
910-0095-001 Revision J November 2007
Advertisement
Table of Contents
