Table of Contents
Advertisement
T1000 AS Hardware Features
Table 3-1.
Dimension
Depth
Height
Width
1.
Tekelec makes no warranties for servers that are installed without proper clearances or
that are removed from Tekelec-standard frames.
2.
The Tekelec 1000 enclosures should be free to slide only during installation, service, or
repair; they should be locked down at all other times.
Cable Management Arms
The T1000 AS is installed on slides for easy access. When the chassis is slid in or
out, strain on the cables is relieved by one of the following cable management
systems:
• Side Cable Management Arms
These cable management arms are attached to the sides of the frame and
fold inward towards the back of the T1000 AS it is slid out from the frame
(see Figure 3-7 on page 3-11). A T1000 AS chassis that is shipped with
these cable management arms also includes tension bars that are mounted
on the rear of the server to further reduce strain on the cables.
3-10
Tekelec 1000 Chassis Dimensions
Value
20.6 inches from front
surface to rear
bulkhead
6.9 inch high (4U)
form factor
17.6 inches wide, with
slides
Notes for Rack-Mounting
Allows over 2.5 inches of depth for cable management
in a Tekelec Heavy Duty Frame. The pull handles on the
front lid protrude 0.75 inches leaving 0.3 inches of
clearance between the handles and a perforated door
assembly. Chassis slide lock brackets are used to anchor
the Tekelec 1000 chassis in position during normal
operation.
Allows for multiple Tekelec 1000 chassis and associated
Ethernet switches to be mounted in a Tekelec Heavy
Duty frame
Allows for a Tekelec 1000 chassis to be installed in 19
inch racks. Adapter plates are required to mount a
Tekelec 1000 chassis with slide rails in 23 inch frames.
910-0095-001 Revision J November 2007
Advertisement
Table of Contents
