Table of Contents
Advertisement
8.
Adjust the chassis retention brackets on the front of the T1000 AS chassis to
contact the frame adapter brackets when the chassis is positioned correctly in
the frame.
9.
Secure the chassis with one # 12-24 screw in the chassis retention brackets on
each side.
10.
This procedure is complete.
PCI Card Part Number Information
The part number information for PCI cards is located on both of the following
labels:
• Label on each PCI card (see Figure 7-19 on page 7-38).
Use this label during replacement of the part to verify that the correct part
number was ordered (see Procedure 7-12, "Replace a PCI Card," on page
7-37).
• The PCI slots label on the outside of the T1000 AS chassis. Figure B-10
shows where this label is located and Figure B-11 shows a closeup view of
a blank label. Use this label when requesting an RMA. Procedure B-5 on
page B-14 provides instructions about how to view this label.
Figure B-10. T1000 AS Chassis Label Locations
Base unit/hard disk
Server
identification
label
910-0095-001 Revision J November 2007
PCI slots label
label
C R IT IC
A L
M IN O R
How to Locate T1000 AS Part Numbers
Caution: Follow shut down
procedure before opening lid
T e k s e r
v e r
P O W E
R B
Memory label
B-13
Advertisement
Table of Contents
