T1000 As Rear I/O Panel; T1000 As Status Indicators; Figure 3-5. Rear I/O Panel - Tekelec T1000 Hardware Manual

T1000 AS Hardware Features

T1000 AS Rear I/O Panel

The rear input/output (I/O) panel is perforated to facilitate airflow and forms the
back wall of the Tekelec 1000 enclosure. It has openings for:
• Eight peripheral component interface (PCI) cards' I/O panels
• The I/O connectors on the rear edge of the main board (mouse, keyboard,
VGA, serial port, E1 or T1 clock inputs, and two USB ports)
• The power board I/O (logic ground connection)
Power entry is at the rear of the Tekelec 1000 platform. There are two right angle
power connectors (A and B feeds) on the power board that are accessible through
the rear I/O panel. The power input connectors are keyed and have positive
locking features.
Logic ground is carried on a 15-position, right-angle connector on the power
board. The connector is bulkhead-mounted to the rear I/O panel. There are also
two chassis ground connector studs on the rear I/O panel. See Figure 3-5 for a
detailed view of the rear I/O panel.
NOTE: Figure 3-5 shows empty PCI slots.

Figure 3-5. Rear I/O Panel

Rear Cable arm
connection

T1000 AS Status Indicators

The T1000 AS platform provides the following light-emitting diode (LED) status
indicators on the front panel of the Tekelec 1000 platform (see Figure 3-6):
• Critical, Major, and Minor visual alarm indicators indicate operational
condition of the Tekelec 1000 platform, including status of the major
subsystems: processors, volatile memory, non-volatile memory (disk drives,
etc.), and interfaces.
• Indicators for A and B power inputs.
3-8
Chassis ground -48 VDC Input B
Logic ground
LOGIC GND
CLK
USB A
SERIAL
VGA
B
RJ45 B
VGA Serial
RS-232
(2) USB
RJ45 A
-48 VDC Input A
PWR A
PWR B
PCI 8 PCI 7 PCI 6 PCI 5 PCI 4 PCI 3 PCI 2 PCI 1
Mouse
Keyboard
910-0095-001 Revision J November 2007
03_ts_flat-rear
PCI 1
PCI slots
slot