Table of Contents
Advertisement
Table A-1.
Interface
PCI Slots
Serial
interface
USB ports
External
timing
interface
Video port
Table A-2.
Interface
Dial-up access
Ethernet
Serial
Electrical Features
The Tekelec 1000 platform offers the following standard electrical features:
• Operates from -48 VDC +/- 5% power input according to Network
Equipment Building System (NEBS) requirements in accordance with typical
telecommunications applications
• Includes short-circuit protections and safety precautions in accordance with
common standards
910-0095-001 Revision J November 2007
Basic Interfaces
Description
Eight Peripheral Computing Interface (PCI) expansion slots can accommodate
Tekelec-designed or commercial-off-the-shelf (COTS) expansion modules.
A standard RS-232D serial interface is usually used for connecting to other servers.
However, this connection can be disconnected so that a terminal can be connected
to perform error recovery or system upgrade.
Additional serial interfaces can be added optionally (see Table A-2).
Four Universal Serial Bus (USB) ports to support direct connectivity to peripherals,
including keyboard and mouse. The USB ports are accessible as follows:
•
Two from the rear.
•
Two under the lid.
External timing interface for synchronizing operations with network timing
standards, as required for specific configurations. This timing interface may be
implemented on Signaling Link modules as applicable.
Direct connection to standard video graphic array (VGA) color monitors for
applications that require direct workstation connectivity.
Optional Interfaces (on PCI Cards)
Description
An internal modem for remote dial-up access for troubleshooting and
provisioning purposes.
The Tekelec 1000 platform can support Ethernet ports of 10Mbps, 100Mbps, or
1Gb operation as needed for specific product configurations. Each PCI slot can
support a qualified Ethernet card that can support two Ethernet ports
(although it is not typical that all PCI slots contain Ethernet cards).
PCI cards that supply additional serial interfaces can be added to the T1000 AS
platform. These serial interfaces are used to connect to other servers located in
the same frame.
Electrical Features
A-3
Advertisement
Table of Contents
