Table of Contents
Advertisement
9.
Adjust the chassis retention brackets on the front of the T1000 AS chassis to
contact the frame adapter brackets when the chassis is positioned correctly in
the frame.
10.
Secure the chassis with one # 12-24 screw in the chassis retention brackets on
each side.
11.
This procedure is complete.
Removable Media Disk Drive Assembly
Part Number Information
The part number information for removable media disk drive assemblies is
located only on the labels on the those assemblies. Figure B-4 on page B-7 shows
where the removable media disk drive assembly part label is located.
Procedure B-3 on page B-8 provides instructions about how to access this label.
Figure B-4. Removable Media Disk Drive Assembly Part Label
910-0095-001 Revision J November 2007
How to Locate T1000 AS Part Numbers
Part number label
Removable
Media Disk Drives
Front Top Cover
(shown 0pen)
B-7
Advertisement
Table of Contents
