Figure 5-3. Slide Assembly Inner Member Roller Side View - Tekelec T1000 Hardware Manual

Figure 5-3. Slide Assembly Inner Member Roller Side View

5.
Set the slide members aside for use later in this procedure.
6.
Attach the four frame adapter brackets to the frame (23-inch frame only) using
two each of the #12-24 Phillips screws. Orientation is important; see Figure 5-4
and Figure 5-5 for views of the frame adapter brackets with correct
positioning. The small jog in the brackets is directed toward the rear of the
frame.
NOTE: If the frame is 19-inch, do not use the frame adapter brackets. In
19-inch frames, the slide assembly brackets that are attached to the outside
members are attached directly to the frame.
910-0095-001 Revision J November 2007
How to Install an Individual T1000 AS Unit
Slide Release Button
5-7