T1000 As Hardware System In A Dc Environment - Tekelec T1000 Hardware Manual

T1000 AS Hardware System in a DC Environment

In a Direct Current (DC) environment, a T1000 AS hardware system consists of
the following hardware components, which are assembled in a heavy-duty frame
by Tekelec and delivered as one unit when first ordered (some applications allow
additional T1000 AS units, to a maximum of five, to be added later):
• Depending on the applications loaded, from one to five T1000 AS units,
identified as A through E, starting with the topmost server identified as A.
Each server consists of T1000 AS hardware that is loaded at the factory
with platform software and application software. Some applications allow
each server to be installed with different application software. (The
minimum and maximum number of servers in the frame depends on
which applications are loaded; for more information, refer to the
applications documentation and to the
overview of the T1000 AS units, see "T1000 AS Hardware Features" on
page 3-5.
NOTE: Some applications allow individual T1000 AS units (to a
maximum of five per frame) to be added later.
• Two Breaker Panels (BPs). For an overview, see "Breaker Panels" on page 3-11;
for more information, refer to the documentation delivered with the product.
• Additional equipment, such as consoles and communications switches,
routers, and hubs. For more information on these components, refer to the
documentation delivered with the product.
Figure 3-1 shows an example T1000 AS hardware system in a DC environment.
NOTE: This figure shows the maximum configuration of five servers in the
frame. For more complete information about the configuration used by the
application, refer to the
910-0095-001 Revision J November 2007
T1000 AS Hardware System in a DC Environment
DC assembly drawing.
DC assembly drawing.) For an
3-3