How To Cable A T1000 As Frame - Tekelec T1000 Hardware Manual

How to Cable a T1000 AS Frame

WARNING: Verify that all breakers are set to the OFF (O) position.
Verify that the cables already attached are connected correctly. (The T1000 AS
hardware system frame is shipped with most of the cables already attached.)
Complete any other required cable connections.
To determine the cables used and how to connect them, refer to the
interconnect
and a diagram of how to connect it.
NOTE: Some of the listed cables are used only as required. Actual cables used
may vary by application.
To view a drawing of a cable, refer to the
the cables that appear in the system interconnect diagram with a link from each
part number to the drawing for that part number.
910-0095-001 Revision J November 2007
diagram, which lists each cable, its quantity, length, how it is used,
How to Cable a T1000 AS Frame
DC Cable List document, which lists all
DC system
4-19