Hardware Manual
Figure 46: Slide Assembly Inner Member Roller Side View
5. Set the slide members aside for use later in this procedure.
6. Attach the four frame adapter brackets to the frame (23-inch frame only) using two each of the
#12-24 Phillips screws.
Orientation is important; see
48: Frame Adapter Brackets and Slide Assemblies
with correct positioning. The small jog in the brackets is directed toward the rear of the frame.
910-2969-001 Revision K, June 2009
How to Install Hardware in an Existing Frame
Figure 47: Frame Adapter Bracket Expanded
on page 74 for views of the frame adapter brackets
on page 74 and
Figure
73