Table of Contents
Advertisement
T1100 AS Hardware System Overview
Table 3-1.
Dimension
Depth
Height
Width
Weight
1. Tekelec makes no warranties for servers that are installed without proper
clearances or that are removed from Tekelec-standard frames.
2. The Tekelec 1100 AS enclosures should be free to slide only during
installation, service, or repair; they should be locked down at all other
times.
Cable Management Arms
The T1100 AS is installed on slides for easy access. When the chassis is slid in or
out, strain on the cables is relieved by side cable management arms. These cable
management arms are attached to the sides of the frame and fold inward towards
the back of the T1100 AS it is slid out from the frame (see Figure 3-6 on page 3-10).
A T1100 AS chassis that is shipped with these cable management arms also
includes tension bars that are mounted on the rear of the server to further reduce
strain on the cables.
910-2969-001 Revision H, February 2007
Preliminary
Tekelec 1100 AS Chassis Dimensions and Weight
Value
21.6 inches from
front surface to
rear bulkhead
6.9 inch high (4U)
form factor
17.6 inches wide,
with slides
65 Pounds
Notes for Rack-Mounting
Allows over 2.5 inches of depth for cable
management in a Tekelec Heavy Duty Frame.
Chassis slide lock brackets are used to anchor
the Tekelec 1100 AS chassis in position
during normal operation.
Allows for multiple Tekelec 1100 AS chassis
and associated Ethernet switches to be
mounted in a Tekelec Heavy Duty frame
Allows for a Tekelec 1100 AS chassis to be
installed in 19 inch racks. Adapter plates are
required to mount a Tekelec 1100 AS chassis
with slide rails in 23 inch frames.
Moving the chassis requires two people.
3-9
Advertisement
Table of Contents
