Removable Media Disk Drive Assembly Part Number Information; Figure B-4. Removable Media Disk Drive Assembly Part Label - Tekelec 1100 Hardware Manual

7.
From the front of the frame, simultaneously press the round release buttons
and slowly push the chassis into the frame while observing the cables to avoid
binding or stretching.
NOTE: When the chassis stops moving, the front of the T1100 AS should
be slightly recessed to allow clearance behind the frame door when closed.
8.
Adjust the chassis retention brackets on the front of the T1100 AS chassis to
contact the frame adapter brackets when the chassis is positioned correctly in
the frame.
9.
Secure the chassis with one # 12-24 screw in the chassis retention brackets on
each side.
10.
This procedure is complete.
Removable Media Disk Drive Assembly
Part Number Information
The part number information for removable media disk drive assemblies is
located only on the labels on the those assemblies. Figure B-4 on page B-6 shows
where the removable media disk drive assembly part label is located.
Procedure B-3 on page B-7 provides instructions about how to access this label.

Figure B-4. Removable Media Disk Drive Assembly Part Label

B-6
Preliminary
910-2969-001 Revision H, February 2007
Hardware Repair and Return