Figure 4: Removable Media Disk Drive Assembly Part Label; Figure 5: T1100 As Chassis Front View - Tekelec 1100 Hardware Manual

Hardware Manual
10. This procedure is complete.
Removable Media Disk Drive Assembly Part Number Information
The part number information for removable media disk drive assemblies is located only on the
labels on the those assemblies.
17 shows where the removable media disk drive assembly part label is located. The steps below
provide instructions about how to access this label.

Figure 4: Removable Media Disk Drive Assembly Part Label

WARNING: Always wear an ESD wrist strap grounded to the bench or frame when
working on electronic components.
1. From the front of the frame, remove the # 12-24 Phillips screw from each chassis retention
bracket (see Figure 1: T1100 AS Chassis Front View
Do not remove the screws in the frame adapter brackets.

Figure 5: T1100 AS Chassis Front View

2. From the front of the frame, using the knurled screws on the sides of the chassis, pull forward
until the release buttons on the inner arms of the slide assemblies pop into the holes on each
side.
910-2969-001 Revision K, June 2009
Figure 4: Removable Media Disk Drive Assembly Part Label
on page 15).
About This Manual
on page
17