How To Replace Pci Cards; Figure 7-19. Pci Card Part Label - Tekelec 1100 Hardware Manual

How to Replace PCI Cards

Use the procedure in this section for either of the following purposes:
• To replace a failed PCI card
• To remove PCI cards from a failed T1100 AS chassis and place them in a
replacement T1100 AS chassis
Procedure 7-12. Replace a PCI Card
1.
Do one of the following:
• If this procedure is being performed to move PCI cards from a failed
T1100 AS chassis to the replacement T1100 AS chassis, skip to the next
step.
• If this procedure is being performed to replace a failed PCI card, ensure
that the following have been done:
— An RMA has been obtained (see Procedure B-1, "Obtaining an RMA,"
—A spare PCI card is available. Inspect the replacement card and

Figure 7-19. PCI Card Part Label

7-40
Preliminary
on page B-2)
shipping container for indications of damage. If damage is noted,
contact the project manager or report damage to the carrier. Ensure
that the contents in the shipping container are complete; notify the
project manager or the Customer Care Center of any discrepancies. In
particular, verify that the contents include:
– A part number label on the replacement PCI card (see Figure 7-19)
Field Replaceable Units
910-2969-001 Revision H, February 2007